![]() It does not guarantee 100% the hydraulic seal and therefore is accompanied by other interventions.Īs in the case of tiles and mosaic, it can undergo micro-fractures caused by temperatures and soil settling. Its application requires walls that are perfectly dry and clean and can not be applied to materials other than concrete, in addition to specific characteristics. The paint coating technique is used for concrete pools and precisely consists in painting the walls of the structure with particular products based on acrylic resins. The laying phases, with the relative waterproofing treatment for swimming pools and the careful execution of each work, are similar to ceramic coating. The tiles that make the mosaic generally have 10 x 10 mm, 20 x 20 mm or even higher dimensions. The same type of critical aspects and strengths apply as for the tiles, however its use is widespread. Available in textures and colors for every taste, the mosaic is the ideal covering for those who want to create a work with great visual impact. It has always been used to create elegant and valuable projects. The ceramic allows you to customize the pool, as well as being resistant to cleaning products, UV rays and biological agents.ĭespite these positive aspects, the weak point of this type of coating is the joints, which must be checked every 4-5 years or so. ![]() The most used material in the form of tiles is Gres: glued to the bottom and to the walls of the tank, it requires an internal and external waterproofing treatment. This type of coating is now used only for reinforced concrete pools. It has the same technical specifications as reinforced PVC but differs for its application: it is prefabricated directly in the factory according to the specifications of the tank, and is then applied through a suction system. PVC pools have a smooth but non-slippery finish, PVC is resistant to UV rays and has a long installation time, it is fixed directly on the spot and remains perfectly attached to the walls. PVC is one of the most used materials for any type of pool due to its adaptability, its impermeability, resistance and easiness of cleaning. A pool cladding goes from the bottom to the pool walls and is characterized by a variety of materials. Swimming pool design – render produced with Edificius software Other aspects of the swimming pool project: cladding, pool surrounds, copings and equipment CladdingsĪfter defining the type of pool to be built, it is necessary to choose an appropriate type of cladding, to guarantee good safety and hygiene requirements and a pleasant aesthetic result. This system involves more accurate filtration and also allows effective aesthetic results, creating a ‘knife edge’ pool effect. The channel can be positioned at the pool edge or set back behind a tiled margin for at least 60% of the pool perimeter. A ‘ deck level’ edge allows pool water to constantly overflow the edges of the pool tank and drain into a continuous channel set into the pool surround and to be gathered into a compensation tank.Most pool skimmers are accessed via the pool deck area through a trap door or hatch of rectangular shape and they compensate the need for a compensation tank. Most skimmers on in-ground pools are built into its upper sides, where the suction draws debris and traps it.The water can be fed into the tank both from the walls and from the bottom, provided that the water is homogenized. When designing a swimming pool project, it is necessary to provide a suitable water filtration and purification system with recirculation system and a compensation tank. Semi-olympic swimming pool cross-section made with Edificius Pool installation: water treatment and recovery systems
0 Comments
Leave a Reply. |